Delta Fire Retardant Fleece Tape is a high-performance fleece-backed butyl waterproof sealing tape for butt joints and overlapping of membranes. This flexible, self-adhesive tape enables the sealing of membranes together, join or where overlapping is required.
Delta Fleece Tape has been designed for use with our Delta PT membrane. This exceptional one-sided sealing tape with its fleece backing is ideal for plastering or rendering directly onto (100mm x 20m).
Delta Rope a robust and dependable product used for the application of sealing Delta plugs which do not have grommets. Delta rope is a roll based Butyl rubber compound ideal for sealing fixing plugs and 8mm membranes (22.5mm x 28mm).
Delta Tape is used for the application of joining membranes. This strong and durable double sided butyl tape is ideal for sealing membranes together at overlaps/adjacent seals (22.5m x 28mm).
Delta PT 3mm mesh membrane has been developed specifically for addressing the issues of damp and contaminated walls, or where fast reinstatement of wall finishes is required after chemical damp proof injection.
Delta PT 3mm a High Density Polyethylene (HDPE) low profile studded membrane with a heat welded polypropylene mesh. The PT 3mm mesh provides a key for plasters, renders and dab fixing of plasterboards.
Delta FM is a Virgin High Performance PE-VHD. Specifically designed for floor applications to combat capillary dampness and contamination. The low stud profile (4 mm) minimises the impact upon existing floor levels but still provides an air gap to achieve damp pressure equalisation. The special low profile offered by Delta FM is excellent for detailing existing staircases and tight spaces. Delta FM can be linked to other Delta MS membranes.
A fast-track application which allows for various floor finishes to be achieved with zero ‘down time’.
Delta AT 800 is an innovative Type C Drainage Membrane which conforms to BS 8102:2022 and BS 8485:2015+A1:2019, Table 7 achieving waterproofing and ground gas protection simultaneously.
Delta AT 800 offers maximum protection in just one application. Designed to offer drainage protection in Type C waterproofing (Grade 3 environment) in accordance with BS 8102:2022 this innovative membrane also offers barrier protection to ground gases Carbon Dioxide, Radon and Methane in accordance with BS 8485:2015 +A1:2019, Table 7 with high adhesion to the application of flame retardants.
Delta PT is a High Density Polyethylene (HDPE) cavity drain membrane. Delta PT has been designed to incorporate a plastic mesh which is welded to the surface of this dimpled sheeting membrane. Suitable as an impermeable damp proofing base for plaster or shotcrete (and as a water control and drainage membrane) in tunnel construction or for remedial damp proofing and waterproofing of existing basements internally.
Delta MS 20 is a High Density Polyethylene (HDPE) high drainage cavity drain membrane with superior drainage capacity and compressive strength. Delta MS 20 is suitable for use as a high performance water control and management system in building and civil engineering construction. A superior solution for waterproofing basement floors and walls.
DELTA MS 500 is a cavity drain membrane that is used for waterproofing on walls, floors and vaulted ceilings, above and below ground, in new construction or in existing buildings over a contaminated or damp background.
Delta MS 500 is an 8mm studded profile High Density Polyethylene (HDPE) clear cavity drainage membrane suitable for use on the internal faces of walls and floors as a water control & drained management system for protection of sub-ground structures against potentially adverse effects of ground water ingress.
Delta MS 500 Fire Retardant is a new 8mm studded Type C, Cavity Drainage Membrane that has been manufactured with DELTASAFE, a new innovative fire-retardant property which enables Delta MS 500 Fire Retardant to achieve a Euroclass rating of B-S2, d0 in accordance with EN 13501-1:2018.
This Fire-retardant High-Density Polyethylene (HDPE) cavity drainage membrane has an 8mm studded clear profile. Suitable for use on the internal faces of walls and floors as a water management system for the protection of below ground structures against the potentially adverse effects of ground water ingress.
A professional grade, tough, and durable PU Foam Applicator Gun. Metal-bodied with a nylon handle, it allows gun-grade expanding foam to be applied cleanly and precisely.
Pu Foam Cleaner Is Designed To Rapidly Dissolve, Remove And Clean Uncured Pu Foam From Surfaces And For Cleaning Pu Foam Applicator Guns. Comes Complete With Dual Fitting Nozzle That Connects To Pu Foam Guns For Cleaning Or To Spray Directly Onto Surfaces.
Aerosol applied, solvent based polyurethane foam cleaner. Used for cleaning of PU foam applicator guns. Gun applied PU foam valves and uncured PU foam can also be quick and easily removed with the attachable spray cap.
