F26 DCM FREE UPHOLSTERY ADHESIVE

• DCM FREE Adhesive.
• Highly Controllable Spray Pattern.
• High Green Strength.
• Temperature Resistant Up to 80˚C.

DIRECTIONS FOR USE
• This product is designed to be applied to two surfaces to be 
bonded together. For best results, the temperature of the 
adhesive and the surfaces being bonded should be between 
60 ˚F - 80 ˚F (16 ˚C - 27 ˚C).
• Use with adequate ventilation. 
• Prior to use, check compatibility by spraying a small test patch 
of the adhesive on the substrate. This product may degrade 
some substrates.
1. SHAKE WELL BEFORE USE.
2. Make sure that surfaces are clean, dry and 
free from dirt, dust, oil, loose paint, wax or 
grease, etc. 
3. Spray about 10-20 cm (4” – 8”) away at a 90˚ 
angle to the surface, applying a uniform, 
even coat of adhesive to obtain 80% to 
100% coverage of the surface.
4. If necessary, spray another coat of adhesive 
in areas that appear to need more adhesive. 
Spray surfaces vertically and horizontally.
5. Allow 1 - 2 minutes for adhesive to tack off 
until no adhesive transfers to the knuckle 
when touched. 
6. Adhere surfaces and press together with 
adequate pressure. Allow 24 hours for the 
adhesive to fully cure. 
7. To prevent nozzle from blocking, turn can 
upside down press nozzle until spray is clear 
of adhesive. If nozzle becomes blocked, the 
adhesive can be removed with a solvent 
such as lacquer thinner or acetone.